Filter
Top Products
13 - 72
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
13.2 Various Data Control
(3) Operation to back up all data in the SRAM user area
1. To back up data in the SRAM user area to a drive
Select the drive where the data is to be stored, and
then touch the [Backup all area] button.
2. The dialog box shown left appears.
Check the description of the dialog box. To back up
all data in the SRAM user area, touch the [OK]
button.
To cancel the backup, touch the [Cancel] button.
3. When touching the
[OK]
button in , the dialog box
shown left appears for recheck.
Touching the [OK] button start the backup.
Touching the [Cancel] button cancels the backup.
4. When the file, whose name is the same, exists in the
destination folder, the dialog box shown left appears
without starting the backup.
Touching [OK] button overwrites the file.
Touching the [Cancel] button cancels the backup.
5. The completion dialog box appears when the
restoration is completed.
Touching the
[OK]
button closes the dialog box.