Filter
Top Products
8 - 12
8. OPTION
8.9 Serial Multi-Drop Connection Unit
8.9 Serial Multi-Drop Connection Unit
8.9.1 Serial multi-drop connection unit
GOT serial multi-drop connection is a communication method for 1:N communication by connecting multiple GOTs to
one PLC, using the GT01-RS4-M serial multi-drop connection unit.
For details of GOT multidrop connection, refer to the following.
GOT1000 Series Connection Manual (Mitsubishi Products) for GT Works3
8.9.2 Applicable serial multi-drop connection unit
The following serial multi-drop connection unit is applicable.
8.9.3 Installation
Installed with DIN rail
Install the serial multi-drop connection unit with its hook (1 place) using the DIN rail.
• Applicable DIN rail DIN46277 (width: 35mm)
(Install the DIN rail with screws at intervals of 150mm.)
Directly installed to panel
Install the serial multi-drop connection unit to the panel using 4.5mm holes (2 places).
Model name Description
GT01-RS4-M For GOT multi-drop connection
Serial multi-drop connection unit
Connect to the PLC
RS-485 cable