Filter
Top Products
16. INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS
16.5 CoreOS
16 - 11
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE SETTING
(COMMUNICATION SETTING)
11
DISPLAY AND
OPERATION SETTINGS
(GOT SET UP)
12
CLOCK SETTINGS AND
BATTERY STATUS DISPLAY
(TIME SETTING AND DISPLAY)
13
FILE DISPLAY AND
COPY (PROGRAM/DATA
CONTROL)
14
GOT SELF CHECK
(DEBUG AND SELF
CHECK)
15
CLEANING DISPLAY
SECTION (CLEAN)
16
INSTALLATION OF
COREOS, BOOTOS AND
STANDARD MONITOR OS
16.5 CoreOS
Install CoreOS only when the GOT will not be the status of factory shipment even when BootOS is installed.
Normally, the CoreOS has not to be installed.
POINT
POINT
POINT
Precautions for installing CoreOS
When executing the CoreOS installation once, it cannot be canceled on the way.
Do not attempt the following to cancel the installation on the way. The GOT may not operate.
• Powering off the GOT
• Pressing the reset button of the GOT
If the GOT does not operate, please consult your local Mitsubishi (Electric System) Service center or
representative.
If the GOT does not recover even when installing the CoreOS, the error may be caused by a hardware failure.
Please consult your local Mitsubishi (Electric System) Service center or representative.
16.5.1 Installing the CoreOS
Before installing the CoreOS
(1) Installing procedure
The CoreOS can be installed only when using a SD card.
Installation via USB memory/USB/Ethernet is not available.
(2) Boot OS
When installing the CoreOS, the latest BootOS is also installed automatically.
(Operation by the user is not required.)