Filter
Top Products
8. OPTION
8.3 Battery
8 - 5
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
PARTS NAME
5
UL, cUL
STANDARDS AND
EMC DIRECTIVE
6
INSTALLATION
7
WIRING
8
OPTION
8.3.3 Battery replacement procedure
Replace battery periodically at intervals of 4 to 5 years as reference.
1. Turn the GOT power off.
2. Open the battery cover of the GOT.
3. Remove the old battery from the GOT.
4. Disconnect the old battery connector and insert
the new battery connector within 30s.
5. Install a new battery to the GOT and close the
battery cover.
6. Turn the GOT power on.
7. Check if the battery condition is normal with the
utility.
For details of battery status display, refer to the
following.
12. CLOCK SETTINGS AND BATTERY
STATUS DISPLAY (TIME SETTING AND
DISPLAY)
Battery cover
Connector
Battery cover
Connector