Filter
Top Products
10. COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
10.2 Communication Detail Setting
10 - 11
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE SETTING
(COMMUNICATION SETTING)
11
DISPLAY AND
OPERATION SETTINGS
(GOT SET UP)
12
CLOCK SETTINGS AND
BATTERY STATUS DISPLAY
(TIME SETTING AND DISPLAY)
13
FILE DISPLAY AND
COPY (PROGRAM/DATA
CONTROL)
14
GOT SELF CHECK
(DEBUG AND SELF
CHECK)
15
CLEANING DISPLAY
SECTION (CLEAN)
16
INSTALLATION OF
COREOS, BOOTOS
AND STANDARD
Keyword settings of MELSEC-FX
On the communication detail setting screen of MELSEC-FX, registration, deletion, cancellation, or protection of the
keyword for FX series PLC can be executed.
(1) Regist
Keyword is registered.
1. Touching the [Regist] key displays the Registration Selection screen.
For a FX PLC
*1
that is not compatible with the customer keyword, the keyboard for the keyword input of is
displayed.
Select [Keyword] or [Keyword and Customer keyword].
When the [Enter] key is touched, the selection is completed and the keyboard for the keyword input is displayed.
*1: For details on FX PLC compatible with customer keyword, refer to the manual of the PLC used.
POINT
POINT
POINT
The customer keyword allows the user to clear the protection set by a keyword. However, the protection cannot be
deleted.
Selection Description
When [Keyword] is selected Only keyword can be registered.
When [Keyword and Customer keyword] is selected The Customer Keyword can be registered after registration of the keyword.