Filter
Top Products
8 - 6
8. OPTION
8.4 Protective Sheet
8.4 Protective Sheet
The protective sheet is used to protect the operation surface from damage or dirt when the touch key of GOT display
section is operated.
For the GOT, the protective sheet is attached for transportation. (It is different from the one described in this chapter.)
8.4.1 Applicable protective sheet
8.4.2 Installing procedure
POINT
POINT
POINT
Replacement time of protective sheet
Check the status of the protective sheet visually by the daily inspection.
The visibility becomes worse when there is too much dirt and cracks, causing malfunction. Proceed replacement
promptly.
Product name Model name Description
Protective sheet
GT14-50PSCB
5.7" protective sheet
Clear 5 sheets
GT14-50PSCB Antiglare 5 sheets
GT14-50PSCW Clear (Frame: white) 5 sheets
GT14-50PSGW Antiglare (Frame: white) 5 sheets
1. If the protective sheet has been already attached to the
GOT, remove the old one from the GOT display section
holding the lower right corner.
If the protective sheet for transportation is attached to the
GOT, remove it too.
2. Remove the release paper from the back of a new
protective sheet. Do not remove the protective film.
3. Make sure to fit the sheet on the GOT without wrinkles or
air between the sheet and the GOT.
4. Remove the protective film from the protective sheet.
When the user continues using the GOT with the protective
film, the film may not be removed.