Filter
Top Products
12 - 2
12. CLOCK SETTINGS AND BATTERY STATUS DISPLAY (TIME SETTING AND DISPLAY)
12.1 Time Setting and Display
Operation of time setting
(1) Clock setting
Setup the method to adjust the time between GOT clock data and the clock data of controller connected to the
GOT.
It is same as set in the GOT setup in Environmental Setting of GT Designer3.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
POINT
POINT
POINT
(1) When connecting with an external device which does not have clock function.
If set to [Adjust] or [Broadcast] for [Clock setting] while the GOT is connected with external devices (PLC or
microcomputers) which do not have clock function, the clock data will not be adjusted.
For the list of PLC installed with clock function, refer to the following.
GOT1000 Series Connection Manual for GT Works3
(2) Setting of clock setting and battery
When selecting [Broadcast] or [None] in clock setting, set the clock of the GOT once with connecting a battery
to the GOT.
(3) Operation setting by GT Designer3
Carry out the setting of clock setting in [GOT set up] in [Environmental Setting] of GT Designer3.
To change a part of the setting after downloading the project data, change the setting at the display setting of
GOT.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
Setting Description
Adjust
Adjust the time of GOT clock data to the clock data of controller.
Broadcast
Adjust the time of controller clock data to the GOT clock data.
Adjust/Broadcast
Adjust the GOT and controllers to the controller whose clock data is used as a base.
None No adjustment of clock data.
1. Touching the setup item changes the setup
contents.
2. Touching [OK] button reflects the setup contents.
Touching the [ ] button restarts the GOT.
After restarting, the GOT operates with the changed
setting.
A
djust Broadcast Adjust/Broadcast None