Filter
Top Products
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
13.2 Various Data Control
13 - 25
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE SETTING
(COMMUNICATION SETTING)
11
DISPLAY AND
OPERATION SETTINGS
(GOT SET UP)
12
CLOCK SETTINGS AND
BATTERY STATUS DISPLAY
(TIME SETTING AND DISPLAY)
13
FILE DISPLAY AND
COPY (PROGRAM/DATA
CONTROL)
14
GOT SELF CHECK
(DEBUG AND SELF
CHECK)
15
CLEANING DISPLAY
SECTION (CLEAN)
16
INSTALLATION OF
COREOS, BOOTOS
AND STANDARD
(7) Upload/setup cancel operation
(a) Upload operation
By upload operation, the project data is transferred from the C drive (Flash Memory) to the A drive (Build-in
SD card) or E drive (USB drive).
The SD card or USB memory after uploading can be used for downloading project data to another GOT.
(This item explains using the A drive.)
POINT
POINT
POINT
Before upload operation
The project data cannot be uploaded to the A drive when the project data of the A drive is set up.
Execute setup cancel (
(7)(b) Setup cancel operation) before uploading the project data.
1. Touch [A: Built-in SD card] of [Select drive].
2. Touching [Upload] button displays the screen shown
on the left.
3. Touching [OK] button executes the upload.
4. If there is a project data of the same name in the A
drive, the screen shown on the left is displayed
without starting the upload.
Touching [OK] button executes an overwrite upload
to the project data of the same name.
Touching [Cancel] button cancels the upload.
5. When the uploading is completed, the dialog box
mentioned left is displayed.
Touching [OK] button restarts the GOT.