Filter
Top Products
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
13.2 Various Data Control
13 - 9
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE SETTING
(COMMUNICATION SETTING)
11
DISPLAY AND
OPERATION SETTINGS
(GOT SET UP)
12
CLOCK SETTINGS AND
BATTERY STATUS DISPLAY
(TIME SETTING AND DISPLAY)
13
FILE DISPLAY AND
COPY (PROGRAM/DATA
CONTROL)
14
GOT SELF CHECK
(DEBUG AND SELF
CHECK)
15
CLEANING DISPLAY
SECTION (CLEAN)
16
INSTALLATION OF
COREOS, BOOTOS
AND STANDARD
(3) Upload operation
BootOS and OS in the C drive (Flash Memory) can be uploaded to the A drive (Built-in SD card) and E drive
(USB drive).
The SD card after uploading can be used for installing the OS on another GOT.
16. INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS
(This item explains using the A drive.)
1. Install the SD card used as the uploading destination
to GOT.
For inserting/removing method of SD card/USB
memory, refer to the following.
8.1.2 Installing and removing procedures of
the SD card
8.2.2 Installing and removing procedures of
the USB memory
2. Touch [A: Built-in SD card] of [Select drive].
3. Touching [Upload] starts the uploading.
4. When the upload is completed, the dialog shown left
is displayed.
Touching [OK] button closes the dialog.