Filter
Top Products
11. DISPLAY AND OPERATION SETTINGS (GOT SET UP)
11.1 Display Setting
11 - 1
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE SETTING
(COMMUNICATION SETTING)
11
DISPLAY AND
OPERATION SETTINGS
(GOT SET UP)
12
CLOCK SETTINGS AND
BATTERY STATUS DISPLAY
(TIME SETTING AND DISPLAY)
13
FILE DISPLAY AND
COPY (PROGRAM/DATA
CONTROL)
14
GOT SELF CHECK
(DEBUG AND SELF
CHECK)
15
CLEANING DISPLAY
SECTION (CLEAN)
16
INSTALLATION OF
COREOS, BOOTOS
AND STANDARD
11. DISPLAY AND OPERATION
SETTINGS (GOT SET UP)
Setting screen for display and setting screen for operation can be displayed from the utility screen.
In the setting screen for display and the setting screen for operation, the following settings can be set.
11.1 Display Setting
11.1.1 Function of Display
Setting regarding display is possible.
The items which can be set are shown below. When each item part is touched, the respective setting becomes possible.
*1 Only selectable languages are displayed.
The selectable languages differ depending on the fonts installed in the GOT.
For details of the fonts, refer to the following manual.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
*2 Setting 0 does not hide the title screen.
The title screen is always displayed for 4 seconds or longer (which changes depending on the project data contents).
Item Description Reference
Display
Language, opening screen time, screen save time, screen save backlight, battery alarm display and invert colors 11-1
Adjusting brightness and contrast 11-5
Operation
Buzzer volume, window move buzzer volume, key sensitivity, key reaction speed, touch detection mode 11-6
Security setting 11-9
Utility call key 11-11
Touch panel calibration 11-13
USB mouse/keyboard setting 11-15
Transparent mode Ch No. 11-17
Backup/restoration
Setting the storage locations for backup data and backup settings, and setting the maximum number of backup
data
11-18
Setting the CPU No. setting at backup to "YES" or "NO" 11-19
Trigger backup settings 11-20
Behavior of duplicate IPs
Setting the GOT operation when a device with the same IP address as that of the GOT is added to the network
afterwards.
11-21
Item Description Setting range
Language
*1
Confirmation of the current language and switching language
can be performed regarding with the language displayed by
utility and dialog box.
(Japanese)
(English)
(Chinese (Simplified))
(Chinese (Traditional))
(Korean)
(German)
(At factory shipment: User's selection)
Opening screen time The title display period at the main unit boot can be set.
0 to 60 seconds
*2
(At factory shipment: 5 seconds)
Screen save time
The period from the user stops the touch panel operation till
the screen save function starts can be set.
0 to 60 minutes
(At factory shipment: 5 seconds)
Screen save backlight
Whether turning ON or OFF the backlight simultaneously at
the start of the screen save function can be specified.
ON/OFF
(At factory shipment: OFF)
Battery alarm display
Whether to display system alarm when the voltage of the GOT
internal battery has dropped can be specified.
ON/OFF
(At factory shipment: OFF)
Brightness, contrast
The brightness can be adjusted.
■ Brightness, contrast
-
Invert colors
(only GT1450-Q)
For the user-created screen and the utility screen, whether to
invert the displayed colors can be specified.
ON/OFF
(At factory shipment: OFF)