Filter
Top Products
8. OPTION
8.1 SD Card
8 - 1
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
PARTS NAME
5
UL, cUL
STANDARDS AND
EMC DIRECTIVE
6
INSTALLATION
7
WIRING
8
OPTION
8. OPTION
8.1 SD Card
The SD card is used to transmit the OS or project data and to save the data of the alarm history function.
For details, refer to the following.
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
8.1.1 Applicable SD card
The following SD cards are applicable for GOT.
*1 Some models with the operations checked by our company are usable.
For the operation-checked models, refer to "Operation Check Results of Third Party SD Cards on GT14 Model" (Hime-T-P-0089)
separately available, or contact your local distributor.
8.1.2 Installing and removing procedures of the SD card
Install/remove the SD card with the power supply of GOT is OFF or SD card access switch is "OFF".
Installing
Model name Description
L1MEM-2GBSD SD memory card 2GB
L1MEM-4GBSD SDHC memory card 4GB
-
Commercially-available SD card
*1
1. Set the SD card access switch of the GOT to "OFF", and
make sure
that the SD card access LED turns off.
When the SD card access LED turns off, the SD card
can be installed even during the GOT power on.
2. Insert the SD card into the SD card interface with its front
side (nameplate side) outside.
3. Turn the SD card access switch on.
After the SD card access switch is turned on, the SD
card can be used.
SD card
front face