Filter
Top Products
13 - 24
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
13.2 Various Data Control
(b) Setup operation
Sets the project data stored in the A drive (Built-in SD card) to be used in the GOT.
The GOT monitors using the monitor data in the A drive.
POINT
POINT
POINT
Before setup operation
When storing project data from GT Designer3 to SD card, select [A: Standard SD Card] for [Project Data] in [Boot
Drive].
1. Mount the SD card to GOT. For the SD card
installation/removal method, refer to the following.
8.1.2 Installing and removing procedures of
the SD card
2. Touch [A: Built-in SD card] of [Select drive].
3. Touching [Download] button displays the screen
shown on the left.
Touching [OK] button executes the setup.
4. When the setup is completed, the dialog box
mentioned left is displayed.
Touching [OK] button restarts the GOT.