Filter
Top Products
12. CLOCK SETTINGS AND BATTERY STATUS DISPLAY (TIME SETTING AND DISPLAY)
12.1 Time Setting and Display
12 - 3
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE SETTING
(COMMUNICATION SETTING)
11
DISPLAY AND
OPERATION SETTINGS
(GOT SET UP)
12
CLOCK SETTINGS AND
BATTERY STATUS DISPLAY
(TIME SETTING AND DISPLAY)
13
FILE DISPLAY AND
COPY (PROGRAM/DATA
CONTROL)
14
GOT SELF CHECK
(DEBUG AND SELF
CHECK)
15
CLEANING DISPLAY
SECTION (CLEAN)
16
INSTALLATION OF
COREOS, BOOTOS
AND STANDARD
(2) Clock display
Carry out the display and setting of GOT clock data.
The setup methods of clock data are shown below.
(3) GOT internal battery voltage status
Displays battery voltage status.
When the battery voltage is low, replace the battery immediately.
For battery replacement procedure, refer to the following.
8.3.3 Battery replacement procedure
1. Touching the clock display section displays the
keyboard for input and stops the clock update.
2. Input time with the keyboard by referring to the
table below.
Input the scheduled time when the operation of
is to be carried out since the input time is reflected
at the time of the operation of .
The day of the week is displayed automatically
according to the input date.
The effective range of clock setting is as follows.
Jan. 1, 2000 to Dec. 31, 2037
Key Description
to
Input numeric value in cursor position.
/
Move the cursor.
Move the cursor to the left by one character when [Del] Key is touched while inputting year, month, day, time, minutes, seconds.
Carry out nothing when touched other than when inputting the above.
Close the keyboard after the input time is displayed in clock display.
The update of the clock display does not restart even if the keyboard is closed.
The update of the clock display restarts with the operation of .
Cancel the input time and returns the time of clock display to the time at which the keyboard was displayed and close the
keyboard.
The update of the clock display does not restart even if the keyboard is closed.
The update of the clock display restarts with the operation of .
0 9
Del
Enter
Cancel
3. Touching the [OK] button reflects the settings and
restarts updating the clock display.
Then, the settings are reflected to both clock data
on the GOT and controller.
Touching [ ] button restarts the GOT if the clock
settings is changed, or closes the screen if clock
settings is not changed.
Display Status
Normal Normal
Low/None Low voltage