Filter
Top Products
10 - 8
10. COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
10.2 Communication Detail Setting
10.2 Communication Detail Setting
10.2.1 Communication detail setting functions
10.2.2 Display operation of Communication Detail setting
Communication settings
POINT
POINT
POINT
Communication parameter setting by drawing software
Select [Common Settings] [Communication Settings] from GT Designer3 to enter the communication
parameters for each communication driver.
When changing the communication parameters after downloading project data, change the setting at
communication detail setting of GOT.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
Function Description
Communication parameters
setting
Set various communication parameters of communication devices. The settable parameters differ according to the
communication device.
Keyword Register For the FX series PLCs, key word for protecting program in the PLC can be set.
Keyword Delete For the FX series PLCs, key word for protecting program in the PLC can be deleted.
Keyword Clear For the FX series PLCs, the program protection status in the PLC can be cancelled.
Keyword Protect For the FX series PLCs with the 2nd keyword in use, the cancelled program protection in the PLC can be reactivated.
1. Touch the driver display BOX of the communication
parameter to be set in the [Communication setting]
screen.
2. The screen switches to the [Communication Detail
setting] screen.
Set communication parameters from this screen.
For the setting change operation, refer to the
following.
9.3.3 Basic operation of settings change
Communication
parameter