Filter
Top Products
8 - 14
8. OPTION
8.10 Panel-Mounted USB Port Extension
8.10 Panel-Mounted USB Port Extension
GT14-C10EXUSB-4S panel-mounted USB port extension is a waterproof extension cable of the USB.
It is used to pull out the USB interface (host) on the back of GT14 to the surface of the control panel.
8.10.1 Applicable panel-mounted USB port extension
The following panel-mounted USB port extension is applicable for GT14.
8.10.2 Parts name
The following shows the parts name of panel-mounted USB port extension.
8.10.3 Installing procedure
Installed to panel
Install the panel-mounted USB port extension as follows with attention to a curve or a distortion of waterproof cap,
seal, and nut.
• The panel thickness is 2.0 to 4.0mm.
• For panel-mounted USB port extension, the panel surface with waterproof cap is compatible with IP67f.
• Tightening torque of nut is 0.294 to 0.343N•m. Overtightening or undertightening may disable the waterproof effect.
• Tighten the waterproof cap properly when the cable is not used.
Model name Description
GT14-C10EXUSB-4S Panel-mounted USB port extension
Cap installation chart
USB plug
Nut
Seal
Cable
Model name label
Waterproof cap
Ferrite core
Nut
Waterproof
cap
Seal
Panel thickness: 2 to 4mm
(0.08 to 0.16inch)
19.4±0.1
(0.82"±0.01)
(0.77"±0.01)
Panel Cutting Dimensions
20.8±0.1
Unit: mm (inch)