Filter
Top Products
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
13.2 Various Data Control
13 - 5
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE SETTING
(COMMUNICATION SETTING)
11
DISPLAY AND
OPERATION SETTINGS
(GOT SET UP)
12
CLOCK SETTINGS AND
BATTERY STATUS DISPLAY
(TIME SETTING AND DISPLAY)
13
FILE DISPLAY AND
COPY (PROGRAM/DATA
CONTROL)
14
GOT SELF CHECK
(DEBUG AND SELF
CHECK)
15
CLEANING DISPLAY
SECTION (CLEAN)
16
INSTALLATION OF
COREOS, BOOTOS
AND STANDARD
13.2 Various Data Control
13.2.1 OS information
Function of OS information
Each file name/folder name of BootOS and OS (Standard monitor OS, PC communication driver and Option OS) by
which each drive (A: Built-in SD card, C: Built-in flash memory, E: USB memory) holds can be displayed in lists.
Installation and uploading of the files are also possible.
POINT
POINT
POINT
(1) Notes on installing OS
If the Boot OS or the Standard monitor OS is installed, such data on the GOT as the project data will be
deleted.
After installing the Boot OS or the Standard monitor OS, reinstall/download necessary data.
(2) Notes on handling OS files
When the OS boot drive is set to [A: Built-in SD card], installing and uploading OS files are not available.
Display operation of OS information
Function Description Reference
Displaying file, folder data The file/folder type, name, data size and creating date & time are displayed. 13-6, 13-7
Install
All OS files written in the A drive (Built-in SD card)/E drive (USB drive) can be installed in the C
drive (Built-in flash memory).
13-8
Upload
All OS files in the C drive (Built-in flash memory) can be uploaded to the A drive (Built-in SD card)/
E drive (USB drive).
13-9
Property display Displays the property (file name, data size, type, version and creation date) of the file. 13-10
Data check Data check of files is possible. 13-10
Program/Data control
OS information
Main menu
Select a drive and
operate BootOS
and OS files
Tou ch
[Program/data control]
Tou ch
[OS information]
(
9.3 Utility Display)