Filter
Top Products
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
13.2 Various Data Control
13 - 23
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE SETTING
(COMMUNICATION SETTING)
11
DISPLAY AND
OPERATION SETTINGS
(GOT SET UP)
12
CLOCK SETTINGS AND
BATTERY STATUS DISPLAY
(TIME SETTING AND DISPLAY)
13
FILE DISPLAY AND
COPY (PROGRAM/DATA
CONTROL)
14
GOT SELF CHECK
(DEBUG AND SELF
CHECK)
15
CLEANING DISPLAY
SECTION (CLEAN)
16
INSTALLATION OF
COREOS, BOOTOS
AND STANDARD
1. Mount the SD card/USB memory to GOT.
2. For the SD card installation/removal method, refer to
the following.
8.1.2 Installing and removing procedures of
the SD card
8.2.2 Installing and removing procedures of
the USB memory
3. Touch [A: Built-in SD card] of [Select drive].
4. Touching [Download] button displays the screen
shown on the left. Touching [OK] button executes the
download.
5. If there is a project data of the same name in the C
drive, the screen shown on the left is displayed
without starting the download.
Touching [OK] button executes an overwrite
download to the project data of the same name.
Touching [Cancel] button cancels the download.
6. When the download is completed, the dialogue box
shown on the left is displayed.
Touching [OK] button restarts the GOT.