Filter
Top Products
8 - 2
8. OPTION
8.1 SD Card
Removing
POINT
POINT
POINT
Precautions for removing the SD card
(1) While the SD card access LED is on, do not install/remove the SD card or power off the GOT.
To do so may cause data corruption or malfunction.
(2) When ejecting the SD card, support it by hand since it may pop out.
Failure to do so may cause a fall of the SD card leading to failure or damage of the card.
1. Set the SD card access switch of the GOT to "OFF."
Make sure that the SD card access LED turns off.
When the SD card access LED turns off, the SD card can
be installed or removed even during the GOT power on.
2. Push-in the SD card once and leave your finger, then
remove the SD card.