Filter
Top Products
11 - 2
11. DISPLAY AND OPERATION SETTINGS (GOT SET UP)
11.1 Display Setting
POINT
POINT
POINT
(1) Display setting by GT Designer3
Select [Common Settings] [GOT Environment Settings] [GOT Setup] from GT Designer3 to make the
settings of opening screen time, screen save time and screen save backlight.
To change a part of the setting after downloading the project data, change the setting at the display setting of
GOT.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
(2) Screen save time
Using the system information function can compulsorily switch the controller to the screen saving status
(Forced Screen Saver Disable Signal) or disable the screen save time (Automatic Screen Saver Disable
Signal) set with Utility.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
(3) Screen save backlight
When [Screen save backlight] is set to [ON], using the system information function (Backlight OFF output
signal) can switch the backlight OFF from the controller.
When [Screen save backlight] is set to [OFF], the above signal has no effect on the screen save backlight.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
11.1.2 Display operation of Display
GOT setup
Display
Tou ch
[GOT setup]
Tou ch
[Display]
Main menu
Touch an item to
change settings
(
9.3 Utility Display)