Filter
Top Products
308 Micro Motion
®
Series 3000 MVD Transmitters and Controllers
Sample Tickets
Figure I-3 Configuration ticket and audit event log ticket
For the tickets shown in Figure I-3, codes are used for all items which are selected from a selection
list. For example, FO Flow Source code 0 represents mass flow rate, and FO Flow Source code 5
represents volume flow rate.
Selection lists and codes are documented in the following manuals:
• Using Modbus Protocol with Micro Motion Transmitters, November 2004, P/N 3600219,
Rev. C (manual plus map)
• Modbus Mapping Assignments for Micro Motion Transmitters, October 2004, P/N 20001741,
Rev. B (map only)
In the audit event log ticket:
• The first date and time represent the time at which the ticket print job was initiated.
• All other dates and times represent the time at which the configuration parameter was
changed.
HEADER 1
HEADER 2
M.RESET
29-SEP-2003 1:05:03
::Frequency Output::
0
FO Active
1
FO Polarity
1
FO Flow Source
0
FO Fault Frequency
15000.000000
FO Frequency Factor
1000.000000
. . .
FOOTER
HEADER 1
HEADER 2
HEADER 3
HEADER 4
M. RESET
29-SEP-2003 1:05:03
Audit Trail
001 4-JAN-2003 15:58:58
MA01 Source
0
001 4-JAN-2003 15:58:58
MA02 Source
0
001 4-JAN-2003 15:59:01
FO Flow Source
5
001 4-JAN-2003 15:59:01:
Flow Direction
2
FOOTER