Filter
Top Products
126 Micro Motion
®
Series 3000 MVD Transmitters and Controllers
Ticket Formatting and Printing
Note: The Pre Header, Post Footer, Header Line 1, Header Line 2, and Footer parameters are shared
with all ticket types. Any formatting defined for transfer (OIML) tickets is applied to all tickets.
Note: Other parameters in this menu are defined in Table 13-3.
Note: In previous versions of the custody transfer application, a Transfer Total Format parameter was
displayed. This has been replaced by the W&M Approval option (see Section 14.5, Step 4).
Figure 15-4 Ticket configuration menu – Transfer (OIML) tickets
Table 15-6 Ticket parameters – Transfer (OIML) tickets
Variable Default Description
Pre header codes
Post footer codes
None Printer control codes. Enter any control codes required by your
printer, e.g., form feed.
Header line 1
Header line 2
Header line 3
Header line 4
Footer
Text Blank (no text) Enter the text for this line of the header or for the footer.
You may enter up to 22 characters. Scroll as required to view
all characters.
Line feeds 1 line Enter 1, 2, or 3. This parameter controls the space between the
current line and the following line.
Font size Normal height Select normal height or double height.
(1)
Protocol
•HART
• Modbus RTU
• Modbus ASCII
•Printer
Configure printer
• Printer selection
• Pre header codes
• Header line 1 – 2
•Footer
• Post footer codes
• Baud rate
•Parity
• Data bits
• Stop bits
• Chars per second
• Print buf size
• Lines per page
• Number of tickets
(1)
• Auto print
(1)
Format W&M ticket
Header line 1 – 4
Transfer ticket
• Transfer start (BOL)
• Transfer print
conditions
• Transfer form feed
• Alarm occurred
• Number of transfer
tickets
Footer
Digital comm
Configure RS-485
Discrete inputs
• Transfer print screen
(2)
• Transfer screens to
print
(2)
• Print screen
(3)
• Screens to print
(3)
• Print process monitor
Printer test
(1) Not applicable to transfer (OIML) tickets.
(2) Used to print transfer (OIML) tickets.
(3) Used to print other ticket types.