Filter
Top Products
94 Micro Motion
®
Series 3000 MVD Transmitters and Controllers
Configuring the Process Monitor
12.3 Process monitor screens
The Process Monitor Screens menu allows you to specify the process variable that will appear on the
display. You can configure five screens, displaying 0 to 4 variables on each screen. Font size is
adjusted according to the number of variables configured for display.
See Table 12-1.
Note: For information about using the process monitor, see Chapter 17.
12.4 Process monitor variables
The Process Monitor Variables menu allows you to control the following:
• The precision of the process variable values shown on the display. This does not affect the
precision used in internal processing or communicated via digital communications.
• The label to be used for process totalizer and process inventory values on the display.
• The display of the transfer variable (custody transfer applications only).
To change the precision of a process variable:
1. Select it from the list.
2. Specify the number of decimals that will be displayed. The valid range is 0 to 5.
Table 12-1 Process monitor screen parameters
Variable Default Description
Screen 1, Variable 1 Mass flow rate Select the process variable that will appear on screen 1, line 1.
Screen 1, Variable 2 Mass total Select the process variable that will appear on screen 1, line 2.
Screen 1, Variable 3 None Select the process variable that will appear on screen 1, line 3.
Screen 1, Variable 4 None Select the process variable that will appear on screen 1, line 4.
Screen 2, Variable 1 Volume flow rate Select the process variable that will appear on screen 2, line 1.
Screen 2, Variable 2 Volume total Select the process variable that will appear on screen 2, line 2.
Screen 2, Variable 3 None Select the process variable that will appear on screen 2, line 3.
Screen 2, Variable 4 None Select the process variable that will appear on screen 2, line 4.
Screen 3, Variable 1 Density Select the process variable that will appear on screen 3, line 1.
Screen 3, Variable 2 Temperature Select the process variable that will appear on screen 3, line 2.
Screen 3, Variable 3 None Select the process variable that will appear on screen 3, line 3.
Screen 3, Variable 4 None Select the process variable that will appear on screen 3, line 4.
Screen 4, Variable 1 Density Select the process variable that will appear on screen 4, line 1.
Screen 4, Variable 2 Mass flow rate Select the process variable that will appear on screen 4, line 2.
Screen 4, Variable 3 None Select the process variable that will appear on screen 4, line 3.
Screen 4, Variable 4 None Select the process variable that will appear on screen 4, line 4.
Screen 5, Variable 1 Mass flow rate Select the process variable that will appear on screen 5, line 1.
Screen 5, Variable 2 Volume flow rate Select the process variable that will appear on screen 5, line 2.
Screen 5, Variable 3 Density Select the process variable that will appear on screen 5, line 3.
Screen 5, Variable 4 Temperature Select the process variable that will appear on screen 5, line 4.