Filter
Top Products
Configuration and Use Manual 113
Configuring Custody Transfer
Configuring Custody Transfer StartupConfiguring TicketsConfiguring Digital Communications
Figure 14-4 Security switch on rack-mount Model 3300 or Model 3500
Figure 14-5 Installing lockout screws on rack-mount platform
14.6.3 Field-mount devices
WARNING
Explosion hazard.
In an explosive atmosphere, do not remove the circuit board compartment
cover within 2 minutes after power has been disconnected.
Figure 14-6 identifies the circuit board compartment.
Security switch
Security is enabled when
toggle is downward
Custody transfer tab
Seal wire will be installed by weights and
measures inspector (see Section 14.7)
Protective mask
Replace top 2 or bottom 2
screws with the supplied
lockout screws
2 x Lockout screw
Optional seal wire will be installed by weights
and measures inspector (see Section 14.7)