Configuration and Use Manual 95
Configuring the Process Monitor
Configuring Batch Configuring Process MonitorConfiguring OutputsConfiguring Events Configuring Batch Configuring Process MonitorConfiguring OutputsConfiguring Events Configuring Batch Configuring Process MonitorConfiguring OutputsConfiguring Events Configuring Batch Configuring Process MonitorConfiguring OutputsConfiguring Events
To change the label used for a process totalizer or process inventory value:
1. Select the process totalizer or process inventory from the list.
2. Enter the label to be used. This label will be used on the display and printed on process
monitor tickets.
Additionally, if the custody transfer application is installed and World Area is set to OIML, this menu
allows you to specify one or more process variables to be marked with asterisks on the transfer ticket
and, optionally, the process monitor. This is typically done to identify the process variable used for
legal compliance (the transfer variable).
To do this:
1. Select the process variable from the list.
2. Set
W&M Approval to Approved or Not Approved, as desired.
Note: For more information, see Section 14.5.
12.5 Update period
The update period controls how often the display is refreshed with current data. The default value is
200 msec. The range is 100 to 10,000 msec. The Update Period value applies to all process variables
on the display.
Note: Update Period does not affect the values reported by outputs or digital communications.
