Filter
Top Products
Configuration and Use Manual 93
Configuring Batch Configuring Process MonitorConfiguring OutputsConfiguring Events
Chapter 12
Configuring the Process Monitor
12.1 About this chapter
This chapter explains how to configure the process monitor. Parameters are listed in Figure 12-1.
Failure to perform configuration tasks in the proper sequence could result in an incomplete
configuration. See Section 1.7 for the recommended configuration sequence.
12.2 Monitoring menu
Use the Monitoring menu, shown in Figure 12-1, to access and configure process monitor parameters.
The Monitoring menu is accessed through the Configuration option of the Management menu. To
access the Management menu, see Chapter 4.
Figure 12-1 Monitoring menu
CAUTION
Changing configuration can affect device operation.
Set control devices for manual operation before changing device configuration.
Screen 1, variable 1 ... 4
Screen 2, variable 1 ... 4
Screen 3, variable 1 ... 4
Screen 4, variable 1 ... 4
Screen 5, variable 1 ... 4
Monitoring
Screens Variables
Number of decimals
W&M approval
(1)
Label
Variable list
(1) Displayed only if the custody
transfer application is installed and
World Area is set to OIML.
Update period