Filter
Top Products
Configuration and Use Manual 239
Diagnostics and Troubleshooting
Diagnostics and Troubleshooting Specifications – Model 3350/3700Specifications – Model 3300/3500Measurement Performance
1. If you have a standard core processor:
a. Align the three guide pins on the bottom of the core processor with the corresponding
holes in the base of the core processor housing.
b. Carefully mount the core processor on the pins, taking care not to bend any pins.
2. If you have an enhanced core processor:
a. Plug the sensor cable onto the feedthrough pins.
b. Reinsert the snap clip to secure the sensor cable to the feedthrough.
c. Replace the core processor in the housing.
3. Tighten the captive screw(s) to 6 to 8 in-lbs (0,7 to 0,9 N-m) of torque.
4. Reconnect the wires to the core processor terminals.
5. Replace the core processor lid.
Note: When reassembling the meter components, be sure to grease all O-rings.