176 Micro Motion
®
Series 3000 MVD Transmitters and Controllers
Using Totalizers and Inventories
20.4 Process totalizers
Use the View menu to:
• View the current value of a process totalizer
• Start or stop all process totalizers and inventories simultaneously
• Reset a process totalizer
From the View menu:
1. Select
Process Totalizers.
2. Select
Process. All process totalizers are displayed. Scroll down the list as required.
3. To start all totalizers and inventories, press
START.
4. To stop all totalizers and inventories, press
STOP.
5. To reset a totalizer, highlight the desired totalizer and press
RESET.
Note: The RESET button is available only if resetting totalizers via the display has been enabled. See
Section 5.3.3.
Note: If write-protection has been enabled (see Section 5.3.2), process totalizers cannot be reset
unless the flow rate is zero.
20.5 Process inventories
Use the Maintenance menu to:
• View the current value of a process inventory
• Reset a process inventory
From the Maintenance menu:
1. Select
Process Inventory. All process inventories are displayed. Scroll down the list as
required.
2. To reset a process inventory, highlight the desired process inventory and press
RESET.
Note: The RESET button is available only if resetting totalizers via the display has been enabled. See
Section 5.3.3.
You can also use the View menu to view the current value of a process inventory. From the View
menu:
1. Select
Process Totalizers.
2. Select
Inventory.
3. Select the desired process inventory. Its current value is displayed on screen.
20.6 Batch inventories
Use the Maintenance menu to:
• View the current value of a batch inventory
• Reset a batch inventory
From the Maintenance menu:
1. Select
Batch Inventory. Values for all batch presets are displayed. Scroll down the list as
required.
2. To reset a batch inventory, highlight the desired batch preset and press
RESET.
