Filter
Top Products
Configuration and Use Manual 131
Ticket Formatting and Printing
Configuring Custody Transfer StartupConfiguring TicketsConfiguring Digital Communications
15.7.2 Printing
Batch (OIML) tickets can be printed in several ways:
• Automatically, when the batch ends
• Manually, using the display or a discrete input
Only one batch (OIML) ticket can be printed at a time; the Number of Tickets parameter is not
applied.
The custody transfer transaction ends when the first batch (OIML) ticket is printed for the current
batch. This is true even when the batch is ended, the target is increased, and the batch is then resumed.
In this case, all tickets will contain identical custody transfer data, even though the batch data may
have changed.
Auto print
To print a batch (OIML) ticket automatically when the batch target is reached, set the Auto Print
parameter for batch tickets to Yes (see Table 15-8).
Display
To print a batch (OIML) ticket from the display, use the
PRINT button on the batch process screen.
The
PRINT button appears only when the batch is ended; it does not appear when the batch is stopped.
Discrete input or discrete event
You can configure the Series 3000 device to print a batch (OIML) ticket when a discrete input is
activated or a discrete event occurs. This ticket can include one or several screens in addition to the
batch (OIML) ticket; all assigned screens will be printed.
Note: You can assign one or more actions to a single discrete input or discrete event. Other discrete
input and discrete event actions and assignments are listed and defined in Table 7-14. Note that if you
assign ticket printing to a discrete input or a discrete event, all standard and batch (OIML) tickets can
be printed from one discrete input or discrete event, but if a transfer (OIML) ticket is assigned with
other ticket types, only the transfer (OIML) ticket will be printed. If required, assign the transfer
(OIML) ticket to one discrete input and assign all other tickets to the second discrete input.
To do this:
1. From the Digital Communication menu (see Figure 15-4), select
Configure RS-485, then
select
Discrete Inputs.
2. Use the
Print Screen option to select the discrete input to which you will assign the batch
(OIML) ticket.
3. Use the
Screens to Print option to specify that a batch ticket will be printed. Printing this
ticket will always complete the transfer.
Multiple tickets
If multiple tickets are required, use the
PRINT button or the discrete input to print additional tickets
before the batch is reset. One ticket will be printed for each print request. The additional tickets will
contain the “Duplicate receipt” banner.