Filter
Top Products
Configuration and Use Manual 125
Ticket Formatting and Printing
Configuring Custody Transfer StartupConfiguring TicketsConfiguring Digital Communications
Auto print
To print a batch (NTEP) ticket automatically when the batch target is reached, set the Auto Print
parameter for batch tickets to Yes (see Table 15-4).
Display
To print a batch (NTEP) ticket from the display, use the
PRINT button on the batch process screen.
The
PRINT button appears only when the batch is ended; it does not appear when the batch is stopped.
Discrete input or discrete event
You can configure the Series 3000 device to print a batch (NTEP) ticket when a discrete input is
activated or a discrete event occurs. This ticket can include one or several screens in addition to the
batch (NTEP) ticket; all assigned screens will be printed. To do this:
1. From the Digital Communication menu (see Figure 15-1), select
Configure RS-485, then
select
Discrete Inputs.
2. Using the
Print Screen option, select the discrete input or discrete event to which you will
assign screens.
3. Using the
Screens to Print option, specify the screens that will be printed when the specified
discrete input is activated or the discrete event occurs. You may specify as many screens as
desired.
If the print request occurs:
• When flow is not present (the batch is stopped or ended), the batch (NTEP) ticket is printed.
• When flow is present, the request is queued until flow stops, and the batch (NTEP) ticket is
printed at that time.
Note: You can assign one or more actions to a single discrete input or discrete event. Other discrete
input and discrete event actions and assignments are listed and defined in Table 7-14.
Additional tickets
Before the batch reset is performed, additional batch (NTEP) tickets for the current transaction can be
printed manually, by using the
PRINT button or by activating a discrete input that has been configured
to print a batch (NTEP) ticket. The batch (NTEP) tickets will contain identical custody transfer data,
and all tickets except the first, will include the “Duplicate receipt” banner.
15.6 Transfer (OIML) tickets
This section describes the formatting and printing of transfer tickets when the custody transfer
application is configured for World Area = OIML and the discrete batch application is not used to
manage the custody transfer transaction.
15.6.1 Formatting
To format transfer (OIML) tickets:
1. In the Digital Communication menu, select
Configure RS-485 and set Protocol to Printer.
The menu shown in Figure 15-4 is displayed.
2. Select
Format W&M Ticket.
3. Set parameters as desired. See Table 15-6.