Filter
Top Products
Configuration and Use Manual 167
Operation Mode – Custody Transfer
Operation Mode – Batch Totalizers and InventoriesOperation Mode – Custody TransferOperation Mode
Print job status
For some printer types, a discrete output can be configured to indicate that the ticket could not be
printed (see Section 8.3.2), for one of these two reasons:
• The last ticket print request failed.
• The flow rate is not zero.
If either of these situations occurs, the discrete output is activated.
19.5.5 Transfer log
Note: The transfer log is used only for transfer (OIML) transactions. The transfer log does not
contain entries for batch (NTEP) or batch (OIML) transactions.
Whenever a transfer is completed, transfer data is added to the transfer log. The entry may contain the
transfer totals, or the transfer totals and inventories, and the transfer variable may be marked with
asterisks, depending on configuration (see Section 14.5). An example transfer log entry is shown in
Figure 19-1.
If a ticket is printed but the transfer is not completed, no data is added to the transfer log.
You may view data from the transfer log for the 20 most recent transfers. To do this:
1. Select
Transfer Log from the View menu.
2. Use the
Select BOL to View option to specify the transfer you want to view. Log data for the
selected transfer is displayed automatically.
Figure 19-1 Example transfer log entry
Note: If the Transfer Start (BOL) parameter is changed, the transfer log is reset and all transfer data
is lost.
Note: It is not possible to print the transfer log or retrieve it via digital communications.
Transfer Log
Transfer Not Printed
M. RESET
5-MAR-2007 19:19:02
Transfer (BOL):
1 Complete
Mass Transfer
* 100.000 kg *
Volume Transfer
10000.000 l
EXIT