Filter
Top Products
42 Chapter 1
Preparing for Use
Installing Optional Measurement Personalities
Loading an Optional Measurement Personality
You must load the desired option into your instrument memory.
Loading can be done from a CD-ROM or a www location. The
automated loading program runs from your PC and comes with the
firmware.
NOTE When you add a new option, or update an existing option, you will get
the updated version of all your current options since they are reloaded
simultaneously. This process may also require you to update the
instrument core firmware so that it is compatible with the new option.
You may not be able to fit all of the available measurement
personalities in instrument memory at the same time. The approximate
memory requirements for the options are listed below. These numbers
are worst case examples. Many options share components/libraries so
the total memory usage of multiple options may not be exactly equal to
the combined total.
Instrument
Serial Number:
__________________
System, Show System
Required Information: Key Path:
Required Information: Key Path:
Instrument
Memory:
__________________
System, File System
(This key is grayed out. The total amount of
memory in your instrument will be the sum
of the Used memory and the Free memory)
Available Personality Options File Size (VSA - A.05.20)
GSM measurement personality 2.4 MB
EDGE (with GSM) measurement personality 3.3 MB
cdmaOne measurement personality 2.0 MB
NADC measurement personalities 1.3 MB
PDC measurement personalities 1.4 MB
iDEN measurement personality 1.7 MB
W-CDMA measurement personality
4.2 MB
a
cdma2000 measurement personality
3.8 MB
a
**Shared measurement library 1.5 MB