394 Chapter 5
Language Reference
TRIGger Subsystem
(Trial & ARIB)
90.0 ms for iDEN
20.0 ms with rate=full for NADC, PDC
40.0 ms with rate=half for NADC, PDC
Range: 0.0 ms to 559.0 ms for Basic, cdmaOne, GSM,
cdma2000, W-CDMA (3GPP), W-CDMA (Trial & ARIB)
1.0 ms to 559.0 ms for iDEN, NADC, PDC
Default Unit: seconds
Front Panel
Access:
Mode Setup, Trigger, Frame Timer, Period
Frame Trigger Sync Mode
:TRIGger[:SEQuence]:FRAMe:SYNC EXTFront|EXTRear|OFF
:TRIGger[:SEQuence]:FRAMe:SYNC?
Selects the input port location for the external frame trigger that you
are using.
Factory Preset
and *RST: Off
Remarks: You must be in the Basic, cdmaOne, EDGE (w/GSM),
GSM, iDEN, NADC, PDC, Service mode to use this
command. Use INSTrument:SELect to set the mode.
Front Panel
Access:
Mode Setup, Trigger, Frame Timer, Sync Source
Frame Trigger Synchronization Offset
:TRIGger[:SEQuence]:FRAMe:SYNC:OFFSet <time>
:TRIGger[:SEQuence]:FRAMe:SYNC:OFFSet?
Lets you adjust the frame triggering with respect to the external trigger
input that you are using.
Factory Preset
and *RST: 0.0 s
Range: 0.0 to 10.0 s
Default Unit: seconds