Filter
Top Products
396 Chapter 5
Language Reference
TRIGger Subsystem
Video (IF) Trigger Level
:TRIGger[:SEQuence]:IF:LEVel <power>
:TRIGger[:SEQuence]:IF:LEVel?
Set the trigger level when using the IF (video) trigger.
Factory Preset
and *RST:
−6.0 dBm for cdmaOne, GSM, Basic, Service,
cdma2000, W-CDMA (3GPP), W-CDMA (Trial & ARIB)
−20.0 dBm for iDEN
−30.0 dBm for NADC, PDC
Range:
−200.0 to 50.0 dBm
Default Unit: dBm
Front Panel
Access:
Mode Setup, Trigger, Video (IF Envlp), Level
Video (IF) Trigger Slope
:TRIGger[:SEQuence]:IF:SLOPe NEGative|POSitive
:TRIGger[:SEQuence]:IF:SLOPe?
Sets the trigger slope when using the IF (video) trigger.
Factory Preset
and *RST: Positive
Front Panel
Access:
Mode Setup, Trigger, Video (IF Envlp), Slope
RF Burst Trigger Delay
:TRIGger[:SEQuence]:RFBurst:DELay <time>
:TRIGger[:SEQuence]:RFBurst:DELay?
Set the trigger delay when using the RF burst (wideband) trigger.
Factory Preset
and *RST: 0.0 s
Range:
−500.0 ms to 500.0 ms
−100.0 ms to 500.0 ms for cdma2000, W-CDMA (3GPP),
or W-CDMA (Trial & ARIB)
Default Unit: seconds