Filter
Top Products
Chapter 5 341
Language Reference
SENSe Subsystem
Front Panel
Access:
Mode Setup, Radio, Device
Radio Device Under Test
[:SENSe]:RADio:DEVice INBound|OUTBound
[:SENSe]:RADio:DEVice?
Select the type of radio device to be tested. If you are testing a base
station, it must be put into the test mode to transmit known bit
patterns.
OUTBound – Base station transmitter test
INBound – Mobile station transmitter test
Factory Preset
and *RST: Inbound
Remarks: You must be in the iDEN mode to use this command.
Use INSTrument:SELect to set the mode.
Global to current mode.
Front Panel
Access:
Mode Setup, Radio, Device
Radio Base Station Type
[:SENSe]:RADio:DEVice:BASE[:TYPE] NORMal|MICRo|PICO
[:SENSe]:RADio:DEVice:BASE[:TYPE]?
Select the type of base station to be tested. If you are testing a base
station, it must be put into the test mode to transmit known bit
patterns.
Factory Preset
and *RST: NORMal
Remarks: You must be in the EDGE(w/GSM), GSM mode to use
this command. Use INSTrument:SELect to set the
mode.
Global to current mode.
History: Added revision A.04.00 and later
Front Panel
Access:
Mode Setup, Radio, BTS Type