Filter
Top Products
Chapter 5 325
Language Reference
SENSe Subsystem
Factory Preset
and *RST: 20
200, for W-CDMA, W-CDMA (Trial & Arib)
Range: 1 to 10,000
Remarks: You must be in the cdmaOne, cdma2000, W-CDMA
(3GPP), W-CDMA (Trial & Arib), or Basic mode to use
this command. Use INSTrument:SELect to set the
mode.
Channel Power—Averaging State
[:SENSe]:CHPower:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:CHPower:AVERage[:STATe]?
Turn averaging on or off.
Factory Preset
and *RST: ON
Remarks: You must be in the cdmaOne, cdma2000, W-CDMA
(3GPP), W-CDMA (Trial & Arib), or Basic mode to use
this command. Use INSTrument:SELect to set the
mode.
Channel Power—Averaging Termination Control
[:SENSe]:CHPower:AVERage:TCONtrol EXPonential|REPeat
[:SENSe]:CHPower:AVERage:TCONtrol?
Select the type of termination control used for the averaging function.
This determines the averaging action after the specified number of data
acquisitions (average count) is reached.
EXPonential - Each successive data acquisition after the average
count is reached, is exponentially weighted and combined with the
existing average.
REPeat - After reaching the average count, the averaging is reset
and a new average is started.
Factory Preset
and *RST: REPeat
Remarks: You must be in the cdmaOne, cdma2000, W-CDMA
(3GPP), W-CDMA (Trial & Arib), or Basic mode to use
this command. Use INSTrument:SELect to set the
mode.