Filter
Top Products
Chapter 5 297
Language Reference
SENSe Subsystem
Range: −200.0 dBm to 50.0 dBm
Default Unit: dBm
Remarks: You must be in Basic, cdmaOne, cdma2000, W-CDMA
(3GPP), W-CDMA (Trial & Arib), or iDEN mode to use
this command. Use INSTrument:SELect to set the
mode.
Adjacent Channel Power—Type of Offset Averaging
[:SENSe]:ACP:OFFSet:LIST:AVERage:TYPE MAXimum|RMS
[:SENSe]:ACP:OFFSet:LIST:AVERage:TYPE?
Selects the type of averaging to be used for the measurement at each
offset. You can turn off (not use) specific offsets with the
SENS:ACP:OFFSet:LIST:STATe command.
Factory Preset
and *RST:
Remarks: You must be in Basic, cdmaOne mode to use this
command. Use INSTrument:SELect to set the mode.
History: Revision A.03.00 or later, in cdmaOne revision A.04.00
Adjacent Channel Power—Define Resolution Bandwidth List
iDEN mode
[:SENSe]:ACP:OFFSet:BANDwidth|BWIDth <res_bw>
[:SENSe]:ACP:OFFSet:BANDwidth|BWIDth?
Basic mode
[:SENSe]:ACP:OFFSet:LIST:BANDwidth|BWIDth
<res_bw>,<res_bw>,<res_bw>,<res_bw>,<res_bw>
[:SENSe]:ACP:OFFSet:LIST:BANDwidth|BWIDth?
cdma2000, W-CDMA (3GPP) mode
[:SENSe]:ACP:OFFSet[n]:LIST:BANDwidth|BWIDth
<res_bw>,<res_bw>,<res_bw>,<res_bw>,<res_bw>
[:SENSe]:ACP:OFFSet[n]:LIST:BANDwidth|BWIDth?
Mode Offset A Offset B Offset C Offset D Offset E
Basic &
cdmaOne
RMS RMS RMS RMS RMS