358 Chapter 5
Language Reference
SENSe Subsystem
This is an advanced control that normally does not need to be changed.
Factory Preset
and *RST: AUTO
Remarks: You must be in the Service mode to use this command.
Use INSTrument:SELect to set the mode.
Waveform—ADC Dither State
[:SENSe]:WAVeform:ADC:DITHer[:STATe] |OFF|ON|0|1
[:SENSe]:WAVeform:ADC:DITHer[:STATe]?
This is an Advanced control that normally does not need to be changed.
Factory Preset
and *RST: OFF
Remarks: You must be in the Service mode to use this command.
Use INSTrument:SELect to set the mode.
Waveform—Pre-ADC Bandpass Filter
[:SENSe]:WAVeform:ADC:FILTer[:STATe] OFF|ON|0|1
[:SENSe]:WAVeform:ADC:FILTer[:STATe]?
Turn the pre-ADC bandpass filter on or off. This is an Advanced control
that normally does not need to be changed.
Preset: OFF
Remarks: To use this command, the appropriate mode should be
selected with INSTrument:SELect.
Waveform—ADC Range
[:SENSe]:WAVeform:ADC:RANGe
AUTO|APEak|APLock|GROund|M6|P0|P6|P12|P18|P24|
[:SENSe]:WAVeform:ADC:RANGe?
Select the range for the gain-ranging that is done in front of the ADC.
This is an Advanced control that normally does not need to be changed.
AUTO - automatic range
Auto Peak (APEak) - automatically peak the range
Auto Peak Lock (APLock)- automatically peak lock the range
GROund - ground