Filter
Top Products
304 Chapter 5
Language Reference
SENSe Subsystem
Factory Preset
and *RST: ON
Remarks: You must be in Basic or cdmaOne mode to use this
command. Use INSTrument:SELect to set the mode.
Adjacent Channel Power—Amplitude Limits Relative to the
Carrier
iDEN mode
[:SENSe]:ACP:OFFSet:RCARrier <rel_power>
[:SENSe]:ACP:OFFSet:RCARrier?
Basic mode, cdmaOne
[:SENSe]:ACP:OFFSet:LIST:RCARrier
<rel_power>,<rel_power>,<rel_power>,<rel_power>,<rel_power>
[:SENSe]:ACP:OFFSet:LIST:RCARrier?
cdma2000, W-CDMA (3GPP) mode
[:SENSe]:ACP:OFFSet[n]:LIST:RCARrier
<rel_power>,<rel_power>,<rel_power>,<rel_power>,<rel_power>
[:SENSe]:ACP:OFFSet[n]:LIST:RCARrier?
cdmaOne, W-CDMA (Trial & Arib) mode
[:SENSe]:ACP:OFFSet[n]:LIST[n]:RCARrier
<rel_power>,<rel_power>,<rel_power>,<rel_power>,<rel_power>
[:SENSe]:ACP:OFFSet[n]:LIST[n]:RCARrier?
Sets the amplitude levels to test against for any custom offsets. This
amplitude level is relative to the carrier amplitude. If multiple offsets
are available, the list contains five (5) entries. The offset closest to the
carrier channel is the first one in the list.
[:SENSe]:ACP:OFFSet[n]:LIST[n]:TEST selects the type of testing to be
done at each offset.
You can turn off (not use) specific offsets with the
[:SENSe]:ACP:OFFSet[n]:LIST[n]:STATe command.
The query returns five (5) real numbers that are the current amplitude
test limits, relative to the carrier, for each offset.
Offset[n] n=1 is base station and 2 is mobiles. The default is base
station (1).
List[n]
cdmaOne mode n=1 is cellular bands and 2 is pcs bands. The default is
cellular.