Filter
Top Products
250 Chapter 5
Language Reference
INPut Subsystem
Baseband I/Q - Activate IQ Alignment
:INPut:IQ:ALIGn OFF|ON|0|1
:INPut:IQ:ALIGn?
Activates or deactivates IQ alignment.
Factory Preset
and *RST: Off
Remarks: You must be in the Basic, W-CDMA, cdma2000 mode to
use this command. Use INSTrument:SELect to set the
mode.
History: Added revision A.05.00
Baseband I/Q - I Input DC Offset
:INPut:OFFSet:I <level>
:INPut:OFFSet:I?
Sets adjustment to compensate for I voltage bias on signals when the I
input port is selected.
Factory Preset
and *RST: 0
Range:
−2.5, 0, or +2.5 volts
Default Units: V
Remarks: You must be in the Basic, W-CDMA, cdma2000 mode to
use this command. Use INSTrument:SELect to set the
mode.
History: Added revision A.05.00
Baseband I/Q - Q Input DC Offset
:INPut:OFFSet:Q <level>
:INPut:OFFSet:Q ?
Sets adjustment to compensate Q voltage bias on signals when the Q
input port is selected.
Factory Preset
and *RST: 0
Range:
−2.5, 0, or +2.5 volts
Default Units: V