Filter
Top Products
Chapter 5 321
Language Reference
SENSe Subsystem
511 for GSM700
251 for GSM850
Remarks: You must be in the EDGE(w/GSM), GSM mode to use
this command. Use INSTrument:SELect to set the
mode.
Global to the current mode.
History: Version A.03.00 or later
Front Panel
Access:
FREQUENCY Channel, BMT Freq
Burst Type
[:SENSe]:CHANnel:BURSt TCH|CCH
[:SENSe]:CHANnel:BURSt?
Set the burst type for mobile station testing.
Traffic Channel (TCH) – burst for traffic channel
Control Channel (CCH) – burst for control channel
Factory Preset
and *RST: TCH
Remarks: The command is only applicable for mobile station
testing, device = MS.
You must be in the NADC or PDC mode to use this
command. Use INSTrument:SELect to set the mode.
Channel Burst Type
[:SENSe]:CHANnel:BURSt NORMal|SYNC|ACCess
[:SENSe]:CHANnel:BURSt?
Set the burst type that the analyzer will search for and to which it will
sync. This only applies with normal burst selected.
NORMal: Traffic Channel (TCH) and Control Channel (CCH)
SYNC: Synchronization Channel (SCH)
ACCess: Random Access Channel (RACH)
Remarks: Global to the current mode.
You must be in the EDGE(w/GSM), GSM mode to use
this command. Use INSTrument:SELect to set the
mode.