Chapter 5 219
Language Reference
CALibration Subsystem
Remarks: You must be in the Basic, W-CDMA, cdma2000 mode to
use this command. Use INSTrument:SELect to set the
mode.
History: Added revision A.05.00
Baseband I/Q - IQ Flatness Calibration
:CALibration:IQ:FLATness
:CALibration:IQ:FLATness?
Activates a flatness calibration for all I/Q ranges and impedance
settings.
Remarks: You must be in the Basic, W-CDMA, cdma2000 mode to
use this command. Use INSTrument:SELect to set the
mode.
History: Added revision A.05.00
Baseband I/Q - IQ Offset Calibration
:CALibration:IQ:OFFSet
:CALibration:IQ:OFFSet?
Activates a calibration of the I/Q input offset DAC.
Remarks: You must be in the Basic, W-CDMA, cdma2000 mode to
use this command. Use INSTrument:SELect to set the
mode.
History: Added revision A.05.00
Calibrate the Nominal System Gain
:CALibration:GAIN:CSYStem
:CALibration:GAIN:CSYStem?
Calculate the current system gain correction for nominal settings. That
is, with 10 dB attenuation, 500 MHz center frequency, 0 dB IF gain and
the prefilter off.
Front Panel
Access:
System, Alignments, Align Subsystem, IF