Filter
Top Products
Chapter 2 105
Programming Fundamentals
Using the LAN to Control the Analyzer
General LAN Troubleshooting
• “Troubleshooting the Initial Connection” on page 105
• “Common Problems After You’ve Made the Connection” on page 107
• “Pinging the Analyzer from Your Computer or Workstation” on page
109
• “EIA/TIA 568B Wiring Information” on page 111
Troubleshooting the Initial Connection
Getting the analyzer to work with your network often requires detailed
knowledge of your local network software. This section attempts to help
you with some common problems. Contact your network administrator
for additional assistance.
The analyzer LAN interface does not need or include any proprietary
driver software. It was designed to operate with common network
utilities and drivers.
Either a hardware problem or a software problem can prevent the
analyzer's remote file server from communicating over the LAN. The
following common problems may be encountered: