Agilent Technologies E4406A VSA Satellite Radio User Manual


 
212 Chapter 5
Language Reference
CALCulate Subsystem
SPECtrum, WAVeform)
Front Panel
Access:
Marker, <active marker>, RPG
Marker Readout Y Value
:CALCulate:<measurement>:MARKer[1]|2|3|4:Y?
Readout the current Y value for the designated marker on its assigned
trace. The value is in the Y-axis units for the trace (which is often dBm).
The marker must have already been assigned to a trace. Use
:CALCulate:<measurement>:MARKer[1]|2|3|4:TRACe to assign a
marker to a particular trace.
The measurement must be completed before querying the marker.
Example: CALC:SPEC:MARK1:Y?
Default Unit: Matches the units of the trace on which the marker is
positioned
Remarks: The keyword for the current measurement must be
specified in the command. (Some examples include:
SPECtrum, WAVeform)
Power Statistic CCDFStore Reference
:CALCulate:PSTatistic:STORe:REFerence ON|OFF|1|0
Store the current measured trace as the user-defined reference trace.
Remarks: You must be in the cdma2000 or W-CDMA (3GPP) mode
to use this command. Use INSTrument:SELect to set
the mode.