Filter
Top Products
Chapter 5 293
Language Reference
SENSe Subsystem
Adjacent Channel Power—Offset Frequency Absolute Limit
[:SENSe]:ACP:LIST:ALIMit
<abs_powr>,<abs_powr>,<abs_powr>,<abs_powr>,<abs_powr>
[:SENSe]:ACP:LIST:ALIMit?
Set the absolute limit on offset frequencies relative to the carrier. You
can turn off (not use) specific offsets with the
[:SENSe]:ACP:LIST:STATe command.
Factory Preset
and *RST:
Range:
−200 to 50 dBm
Remarks: You must be in the NADC, cdmaOne, or PDC mode to
use this command. Use INSTrument:SELect to set the
mode.
Adjacent Channel Power—Offset Frequency
[:SENSe]:ACP:LIST[:FREQuency]
<f_offset>,<f_offset>,<f_offset>,<f_offset>,<f_offset>
[:SENSe]:ACP:LIST[:FREQuency]?
Define the offset frequencies. You can turn off (not use) specific offsets
with the [:SENSe]:ACP:LIST:STATe command.
Factory Preset
and *RST:
Range: 10 Hz to 45 MHz
0 to 200 kHz
Default Unit: Hz
Remarks: You must be in the NADC, cdmaOne, or PDC mode to
use this command. Use INSTrument:SELect to set the
mode.
Mode Offset A Offset B Offset C Offset D Offset E
NADC 0 dBm 0 dBm
−13 dBm 0 dBm 0 dBm
PDC 0 dBm 0 dBm 0 dBm 0 dBm 0 dBm
Mode Offset A Offset B Offset C Offset D Offset E
NADC 30 kHz 60 kHz 90 kHz 120 kHz 0 Hz
PDC 50 kHz 100 kHz 0 kHz 0 kHz 0 kHz