Filter
Top Products
Chapter 5 349
Language Reference
SENSe Subsystem
Factory Preset
and *RST: ON
Remarks: To use this command, the appropriate mode should be
selected with INSTrument:SELect.
Spectrum—Averaging Mode
[:SENSe]:SPECtrum:AVERage:TCONtrol EXPonential|REPeat
[:SENSe]:SPECtrum:AVERage:TCONtrol?
Select the type of termination control used for the averaging function.
This determines the averaging action after the specified number of
‘sweeps’ (average count) is reached.
EXPonential - Each successive data acquisition after the average
count is reached, is exponentially weighted and combined with the
existing average.
REPeat - After reaching the average count, the averaging is reset
and a new average is started.
Factory Preset
and *RST: EXPonential
Remarks: To use this command, the appropriate mode should be
selected with INSTrument:SELect.
Spectrum—Averaging Type
[:SENSe]:SPECtrum:AVERage:TYPE
LOG|MAXimum|MINimum|RMS|SCALar
[:SENSe]:SPECtrum:AVERage:TYPE?
Select the type of averaging.
LOG
− The log of the power is averaged. (This is also known as video
averaging.)
MAXimum
− The maximum values are retained.
MINimum
− The minimum values are retained.
RMS
− The power is averaged, providing the rms of the voltage.
SCALar
− The voltage is averaged.
Factory Preset
and *RST: LOG
Remarks: To use this command, the appropriate mode should be
selected with INSTrument:SELect.