Filter
Top Products
Chapter 5 229
Language Reference
DISPlay Subsystem
Date and Time Display
:DISPlay:ANNotation:CLOCk[:STATe] OFF|ON|0|1
:DISPlay:ANNotation:CLOCk[:STATe]?
Turns on and off the display of the date and time on the spectrum
analyzer screen. The time and date pertain to all windows.
Factory Preset
and *RST: On
This parameter is persistent, which means that it
retains the setting previously selected, even through a
power cycle.
Front Panel
Access:
System, Time/Date, Time/Date On Off
Display Annotation Title Data
:DISPlay:ANNotation:TITLe:DATA <string>
:DISPlay:ANNotation:TITLe:DATA?
Enters the text that will be displayed in the user title area of the
display.
Front Panel
Access:
Display, Title
Display, Title, Change Title
Display, Title, Clear Title
Turn the Display On/Off
:DISPlay:ENABle OFF|ON|0|1
:DISPlay:ENABle?
Controls the display. If enable is set to off, the display will appear to
“freeze” in its current state. Measurements may run faster since the
instrument doesn’t have to update the display after every data
acquisition. There is often no need to update the display information
when using remote operation. An instrument preset will turn the
display back on.
Factory Preset
and *RST: On
Remarks: The following key presses will turn display enable back
on: