Chapter 5 249
Language Reference
INPut Subsystem
INPut Subsystem
The INPut subsystem controls the characteristics of all the instrument
input ports.
The INPut subsystem controls the characteristics of all the instrument
input ports.
Baseband I/Q - Select Input Impedance
:INPut:IMPedance:IQ U50|B600|U1M|B1M
:INPut:IMPedance:IQ?
Selects the characteristic input impedance when input port is set to I or
Q. This is the impedance value as well as the unbalanced (U) or
balanced (B) impedence mode.
1000000 or 1E6 sets input impedance to 1 M ohm.
Factory Preset
and *RST: U1M
Remarks: You must be in the Basic, W-CDMA, cdma2000 mode to
use this command. Use INSTrument:SELect to set the
mode.
History: Added revision A.05.00
Baseband I/Q - Select Input Impedance Reference
:INPut:IMPedance:REFerence <integer>
:INPut:IMPedance:REFerence ?
Sets the value of the input impedance reference when input port is set
to I or Q.
1000000 or 1E6 sets input impedance to 1 M ohm.
Range: 1 to 10,000,000.
Default Units: ohm
Remarks: You must be in the Basic, W-CDMA, cdma2000 mode to
use this command. Use INSTrument:SELect to set the
mode.
History: Added revision A.05.00