Filter
Top Products
326 Chapter 5
Language Reference
SENSe Subsystem
Channel Power—Integration BW
[:SENSe]:CHPower:BANDwidth|BWIDth:INTegration <freq>
[:SENSe]:CHPower:BANDwidth|BWIDth:INTegration?
Set the Integration BW (IBW) that will be used.
Factory Preset
and *RST: 1.23 MHz for Basic, cdmaOne, cdma2000
5.0 MHz for W-CDMA (3GPP), W-CDMA (Trial & Arib)
Range: 1 kHz to 10 MHz
Default Unit: Hz
Remarks: You must be in the cdmaOne, cdma2000, W-CDMA
(3GPP), W-CDMA (Trial & Arib), or Basic mode to use
this command. Use INSTrument:SELect to set the
mode.
Channel Power—Span
[:SENSe]:CHPower:FREQuency:SPAN <freq>
[:SENSe]:CHPower:FREQuency:SPAN?
Set the frequency span that will be used.
Factory Preset
and *RST: 2.0 MHz for Basic, cdmaOne, cdma2000
6.0 MHz for W-CDMA (3GPP), W-CDMA (Trial & Arib)
Range: Dependent on the current setting of the channel power
integration bandwidth.
Default Unit: Hz
Remarks: You must be in the cdmaOne, cdma2000, W-CDMA
(3GPP), W-CDMA (Trial & Arib), or Basic mode to use
this command. Use INSTrument:SELect to set the
mode.