Filter
Top Products
296 Chapter 5
Language Reference
SENSe Subsystem
[:SENSe]:ACP:OFFSet[n]:LIST:ABSolute?
W-CDMA (Trial & Arib) mode
[:SENSe]:ACP:OFFSet[n]:LIST[m]:ABSolute
<power>,<power>,<power>,<power>,<power>
[:SENSe]:ACP:OFFSet[n]:LIST[m]:ABSolute?
Sets the absolute amplitude levels to test against for each of the custom
offsets. The list must contain five (5) entries. If there is more than one
offset, the offset closest to the carrier channel is the first one in the list.
[:SENSe]:ACP:OFFSet[n]:LIST[m]:TEST selects the type of testing to
be done at each offset.
You can turn off (not use) specific offsets with the
[:SENSe]:ACP:OFFSet[n]:LIST:STATe command.
The query returns five (5) real numbers that are the current absolute
amplitude test limits.
Offset[n] n=1 is base station and 2 is mobiles. The default is base
station (1).
List[m]
cdmaOne mode m=1 is cellular bands and 2 is pcs bands. The default is
cellular.
W-CDMA (Trial
& Arib) mode m=1 is ARIB, 2 is 3GPP, and 3 is Trial. The default is
ARIB (1).
Factory Preset
and *RST:
Mode Variant Offset A Offset B Offset C Offset D Offset E
Basic 0 dBm 0 dBm 0 dBm 0 dBm 0 dBm
cdmaOne BS cellular 0 dBm 0 dBm 0 dBm 0 dBm 0 dBm
BS pcs 0 dBm
−13 dBm −13 dBm 0 dBm 0 dBm
MS cellular 0 dBm 0 dBm 0 dBm 0 dBm 0 dBm
MS pcs 0 dBm
−13 dBm −13 dBm 0 dBm 0 dBm
cdma2000 50 dBm 50 dBm 50 dBm 50 dBm 50 dBm
W-CDMA
(3GPP)
50 dBm 50 dBm 50 dBm 50 dBm 50 dBm
W-CDMA (Trial
& Arib)
50 dBm 50 dBm 50 dBm 50 dBm 50 dBm
iDEN 0 dBm n/a n/a n/a n/a