Filter
Top Products
255
11 Custom Digital Modulation (Option 431)
NOTE For the N5162A, the softkey menus and features mentioned in this guide are only available
through the Web–Enabled MXG or SCPI commands. For information on the Web-Enabled
MXG, refer to the Installation Guide, the Programming Guide, and to the SCPI Command
Reference.
Before using this information, you should be familiar with the basic operation of the signal generator.
If you are not comfortable with functions such as setting the power level and frequency, refer to
Chapter 3, “Basic Operation,” on page 41 and familiarize yourself with the information in that
chapter.
This feature is available only in N5162A/82A Agilent MXG Vector Signal Generators with Option 431.
Option 431 requires Option 651, 652, or 654.
• Custom Modulation on page 256
• Using the Arbitrary Waveform Generator on page 261
• Using Finite Impulse Response (FIR) Filters in ARB Custom Modulation on page 271
• Modifying a FIR Filter Using the FIR Table Editor on page 276
• Differential Encoding on page 279